Audio I/O

Everything the device is driving right now, as one wide output.

Conductor

The device and channel count of the Conductor mix. On iPad and iPhone this is whatever is attached: HDMI and a USB interface together count every channel each one has. On the Mac choose the device here; CueConductor drives it directly, independent of the system output.

Output pairs

Each Click and FOH strip picks a pair from all available channels. Flip a strip to External with the mix switch to set the External mix's pair. If both mixes land on one pair they double, and the pair chip says so.

Mono

Fold the External mix to mono, the same signal on both channels of each pair, for a single-speaker or summed PA.

The log

What the audio session and the output stage reported: the route and its channel count, the width the output stage was built for, and where each bus landed when the engine started. Copy it and send it when an output is silent. Press Play once before reading it; nothing is logged until the engine starts.

Changes made during playback apply at the next Stop.